As long as you are in good condition, it would help if you strived to properly take care of your shoes and keep them in good condition. With this in mind, we will give you a breakdown of how to clean Salomon hiking shoes. Keep reading to find out how.
Read our review of the best hiking shoes for high arches if you don’t like the Salomon shoes.
Cleaning Salomon hiking shoes
As you prepare to learn how to clean Salomon hiking shoes, the steps to follow are:
Step One: Preparing the cleaning station
In preparing the cleaning station, you will need a dry yet clean towel, a bucket filled with mild soap and warm water, and a soft-bristled brush.
Step Two: Removing the insole and lace
In learning how to clean Salomon hiking shoes, you must remove the lace to quickly clean all nooks and crannies. Then, immediately, you remove the laces and, ideally, the insoles.
With the insoles removed, thoroughly rinse them and allow them to dry in a well-ventilated, ventilated area.
Step Three: Brushing off excess debris and dirt
You should use the soft-bristled brush to remove excess debris or dirt from your shoe’s surface. It would help if you gave attention to the tread, as that is where most of the grime and dirt build-up.
The brush’s aim is to remove dirt and mud where necessary.
Step Four: Soaking the shoes in water and soap
As you clean the Salomon shoes, you are to fill a bucket with warm water and add a tiny amount of mild soap. Deep the shoes within this bucket to let them soak for roughly ten minutes.
This is done to loosen stubborn grime and dirt.
Step Five: Scrubbing the shoes
Now that the shoes have been soaked enough, you are to use your soft-bristled brush again to scrub all other dirt on them.
Focus thoroughly on all areas, as the aim is to get your shoes cleaned. And when you get satisfied, remove the shoes from your cleaning solution, then rinse off the soap.
For those with Salomon shoes that have a Gore-Tex membrane, it is advisable to re-waterproof the shoe’s exterior fabric using a pad or spray.
Nevertheless, you should follow the manufacturer’s instructions to know how to apply some treatments during the cleaning procedure.
Step Six: Thoroughly dry your shoes
The final step is to take the clean shoes and allow them to dry. While using a hairdryer to speed up drying, ensure the shoes are kept from direct flames or heat.
Most people will drop the shoes in a well-ventilated room without exposing them to direct sunlight.
Also, you can place it close to a heat source like a radiator. Then, allow them to dry for at least twenty-four hours before you can wear them again.
Ensure you only put the insoles on and replace the Salomon shoes when completely dry.
Furthermore, for those wanting to speed up the drying process, one trick is to fill the shoes with newspaper. It must be noted that you should not use a washing machine on these shoes, or else you will damage them.
Finally, keep your Salomon shoes in the open air, not a plastic sac. The area must be well-ventilated and protected from the sun.
Frequently Asked Questions(FAQs)
No. The process is the same as cleaning all other hiking shoes.
As we advised, using a washing machine when cleaning these hiking shoes is wrong as they can get damaged.
Conclusion
Learning how to clean Salomon hiking shoes is easy, and we have outlined how to do it in simple steps. Try reading through so that you can go hiking in neat shoes.
We have an article on how to clean merrell hiking boots as well if the Salomon hiking shoes aren’t your thing.